Hello there, I'm an expert in automotive detailing and I'm here to guide you through the process of using Turtle Wax rubbing compound. This product is designed to remove light oxidation, minor scratches, and swirl marks from your vehicle's paintwork. Here's a step-by-step guide to ensure you get the best results:

Step 1: Preparation
Before you begin, it's crucial to properly prepare your vehicle. Start by washing your car thoroughly. Use a high-quality car wash soap and a soft sponge or microfiber mitt to clean the surface. This will remove any dirt, grime, and contaminants that could potentially cause scratches during the compounding process.

Step 2: Drying
After washing, you'll need to dry your car. This is important because any moisture on the surface can interfere with the compound's ability to adhere and work effectively. Use a microfiber towel or a high-quality chamois to gently dry the surface.

Step 3: Surface Temperature
Choose a cool, clean surface to work on. Avoid direct sunlight or areas where the temperature is too high. High temperatures can cause the compound to dry too quickly, which can lead to hazing or uneven application.

Step 4: Application
Take a clean, damp applicator pad or a microfiber towel and apply a small amount of Turtle Wax rubbing compound onto it. Start with a small section of the car, such as a door or a hood. Rub the compound into the surface using a back and forth motion, applying moderate pressure. This will help to cut through the light oxidation and minor imperfections.

Step 5: Working the Compound
Continue to work the compound into the surface until you start to see the paint become shiny and smooth. This usually takes a few minutes of rubbing. Remember to keep the applicator damp to prevent the compound from drying on the surface.

Step 6: Removing Excess
Once you've worked the compound into the surface, it's time to remove the excess. This is important because leaving the compound on the surface can cause it to become ingrained in the paint and create a hazy appearance. Use a clean, damp microfiber towel to gently wipe away the excess compound.

Step 7: Buffing
After removing the excess compound, you'll want to buff the area lightly with a clean, dry microfiber cloth. This will help to remove any remaining residue and will give the paint a high-gloss finish.

Step 8: Inspection
Inspect the area to ensure that all the compound has been removed and that the paint is smooth and glossy. If you notice any remaining compound or if the paint isn't as smooth as you'd like, repeat the process with a fresh section of the applicator or towel.

Step 9: Moving On
Once you're satisfied with the results on one section, move on to the next. Repeat the process for the entire vehicle, making sure to clean and dry the applicator or towel between each section to avoid cross-contamination.

Step 10: Final Touches
After you've finished working the compound into the entire vehicle, you may want to apply a wax or sealant to protect the paint and maintain the shine. This is a great way to lock in the results of your hard work and keep your car looking its best.

Remember, the key to a successful compounding session is patience and attention to detail. Take your time and work in small sections to ensure the best results. And always follow the manufacturer's instructions for the specific product you're using.

read more >>

Wash & dry car. Apply on a cool clean surface, not in direct sunlight.Apply compound onto a damp applicator or cotton towel over a small area, rub into surface using a back and forth motion.Remove excess cleaner before it dries. Buff lightly with a clean, dry cloth.read more >>