As an automotive specialist with years of experience in vehicle maintenance and restoration, I can confidently say that using a polishing compound on headlights is not only possible but also a highly effective method for restoring their clarity and shine. Headlights, over time, can become cloudy, yellowed, or scratched, which can significantly reduce their visibility and the overall aesthetic of the vehicle. Polishing compounds are specifically designed to address these issues.

Step 1: Preparation
Before you begin, it's crucial to prepare the headlights properly. Start by cleaning the surface thoroughly to remove any dirt, debris, or oils that could interfere with the polishing process. Use a mild soap and water solution to wash the headlights, then dry them completely. This step ensures that the polishing compound can adhere properly and work effectively.

Step 2: Sanding (if necessary)
In some cases, particularly with severely scratched or pitted headlights, you might need to start with sanding. Begin with a coarser grit sandpaper, such as 1000 grit, and gradually move to finer grits, like 2000 grit, to smooth out the surface. Always sand in a straight line, not in circles, to avoid creating swirl marks. Remember to keep the surface wet to minimize the risk of scratches.

**Step 3: Application of Polishing Compound**
Once the headlights are clean and, if necessary, sanded, it's time to apply the polishing compound. Choose a compound that is specifically designed for automotive plastics, as these are formulated to be safe and effective on headlight lenses. Apply a small amount of the compound to a clean, soft flannel or microfiber cloth.

Step 4: Polishing
Using the cloth with the compound, begin to polish the headlight in a circular motion. Apply moderate pressure and ensure that you cover the entire surface of the headlight. The circular motion helps to evenly distribute the compound and break down the scratches or cloudiness.

Step 5: Buffing
After you've polished the entire surface, it's time to buff away the compound. Use a clean, dry microfiber cloth to remove the remaining polish. This step will reveal a clearer, shinier surface.

**Step 6: Inspection and Additional Polishing (if needed)**
Inspect the headlights after buffing. If there are still visible imperfections, you may need to repeat the polishing process. It's not uncommon to go through several rounds of polishing to achieve the desired clarity.

Step 7: Protection
Once you're satisfied with the clarity of the headlights, protect them by applying a UV protectant. This will help prevent future yellowing and cloudiness, preserving the shine and clarity of your headlights.

Step 8: Maintenance
Regularly cleaning your headlights and applying a protectant will help maintain their clarity and prolong the life of the polish. Avoid using harsh chemicals or abrasive materials that could damage the plastic.

In conclusion, using a polishing compound on headlights is a practical and cost-effective way to restore their clarity and improve visibility. It requires some patience and attention to detail, but the results are well worth the effort. Always follow the manufacturer's instructions for the specific polishing compound you are using and take the necessary precautions to protect both the headlights and yourself during the process.

read more >>

Polish. A fine polish cleans up the sandpaper scratches and makes the headlight lenses clear again. ... Start the repair with polishing compound and a flannel or microfiber cloth. Smear some compound on the lens and polish in a circular motion.Dec 1, 2017read more >>