As an automotive care specialist with years of experience in the industry, I can provide you with a detailed guide on how to use Simple Green on your car. Simple Green is a versatile cleaning solution that can be used for various cleaning tasks, including washing your car. It's known for its effectiveness in breaking down dirt, grease, and grime without causing damage to the surfaces it's used on. Here's a step-by-step guide on how to use Simple Green for washing your car:

Step 1: Gather Your Supplies
Before you begin, make sure you have the following items:
- Simple Green cleaning solution
- A bucket
- A hose with a spray nozzle
- A soft sponge, car wash brush, or non-abrasive cloth
- A car wash mitt or microfiber wash mitt
- A wheel brush (if cleaning wheels)
- A high-pressure washer (optional)
- A chamois or non-abrasive, clean dry towel for drying
- A spray bottle for rinsing (optional)

**Step 2: Prepare the Simple Green Solution**
Mix the Simple Green solution according to the manufacturer's instructions. Typically, you'll need to dilute it with water in the bucket. The ratio can vary depending on the level of dirt and grime on your car, but a common mix is 1 part Simple Green to 10 parts water.

Step 3: Pre-rinse Your Car
Before applying the Simple Green solution, it's important to pre-rinse your car to remove loose dirt and debris. Use the hose with a spray nozzle to thoroughly rinse the car from top to bottom. This will prevent scratches when you start washing.

Step 4: Apply the Simple Green Solution
Using your soft sponge, car wash brush, or non-abrasive cloth, apply the Simple Green solution to the car in large sections. Start from the top and work your way down, ensuring that you cover all areas of the car. Be sure to scrub the area thoroughly to remove dirt, grease, and grime.

Step 5: Scrub and Clean
Once the Simple Green solution has been applied, use your car wash mitt or sponge to scrub the surface. Pay special attention to areas that are prone to dirt buildup, such as the wheel wells, door jams, and under the bumpers. If you have a high-pressure washer, you can use it to spray off the Simple Green solution as you scrub.

Step 6: Rinse Thoroughly
After scrubbing, rinse the car thoroughly with clean water. Make sure to remove all the Simple Green solution to avoid any residue that could cause spotting or streaking.

Step 7: Dry Your Car
It's crucial to dry your car immediately after rinsing to avoid water spots. Use a chamois or a non-abrasive, clean dry towel to dry the car. Start from the top and work your way down, ensuring that you dry the entire surface.

Step 8: Inspect and Touch Up
Once your car is dry, inspect it for any missed spots or areas that may need a little extra attention. If necessary, you can go back and apply more Simple Green solution and scrub those areas again.

Step 9: Protect Your Car
After washing, it's a good idea to apply a protective wax or sealant to your car's paint to help maintain its shine and protect it from the elements.

Step 10: Clean the Wheels
If you haven't already, now is a good time to clean your wheels. Apply the Simple Green solution to the wheels and scrub them with a wheel brush. Rinse thoroughly and dry.

Using Simple Green on your car is a great way to maintain its cleanliness and appearance. It's safe for most surfaces and can effectively remove a variety of contaminants. Just be sure to follow the steps above and always test a small, inconspicuous area first to ensure that the solution doesn't cause any discoloration or damage.

read more >>

Apply Simple Green solution to car in large sections using a soft sponge, car wash brush or non-abrasive cloth. Scrub area thoroughly and rinse well with clean water. ... Dry immediately with chamois or non-abrasive, clean dry towel. To avoid spotting, do not allow soap to dry on car.read more >>