Hello there, I'm a specialist in material science with a focus on metal care and restoration. When it comes to dealing with oxidized copper, there are several methods that can be used to clean and restore its original shine. Let's delve into some of the most effective techniques.

Oxidized Copper Cleaning Methods


1. Vinegar and Salt Method
This is a popular home remedy that is both cost-effective and easy to perform. The acetic acid in vinegar reacts with the copper oxide to dissolve it, revealing the clean copper underneath. Here's how to do it:
- Prepare the Solution: Combine one tablespoon of salt with one cup of white vinegar in a bowl.
- Create a Paste: Gradually add flour to the vinegar-salt mixture until you achieve a thick paste consistency.
- Apply the Paste: Spread the paste evenly over the oxidized areas of the copper. Make sure to cover all tarnished spots.
- Let it Sit: Allow the paste to sit on the copper for approximately 15 minutes to one hour. The longer you leave it, the more effective it is, but be careful not to let it dry out completely.
- Rinse and Polish: After the waiting period, rinse the copper thoroughly with warm water to remove the paste and any loosened copper oxide. Then, use a soft cloth to polish the copper until it shines.


2. Baking Soda and Water
Another household item that can be used to clean oxidized copper is baking soda. This method is gentle and environmentally friendly.
- Mix Baking Soda and Water: Create a paste with baking soda and a small amount of water.
- Apply the Paste: Apply the baking soda paste to the oxidized copper and let it sit for a few minutes.
- Scrub Gently: Use a soft cloth or sponge to gently scrub the copper. The baking soda acts as a mild abrasive, helping to remove the oxidation.
- Rinse and Dry: Rinse the copper with water and dry it thoroughly to prevent further oxidation.


3. Lemon and Salt
The citric acid in lemons can also help dissolve copper oxide. This method is natural and can be effective for light oxidation.
- Cut a Lemon: Cut a lemon in half and dip the cut side into salt.
- Rub on Copper: Use the salt-covered lemon to rub the oxidized areas of the copper.
- Rinse and Dry: Rinse the copper with water and dry it to prevent further tarnishing.


4. Commercial Copper Cleaner
There are also commercial copper cleaners available on the market that are specifically designed to remove oxidation and tarnish. These products are usually safe and effective but should be used according to the manufacturer's instructions.


5. Ketchup and Salt
Ketchup contains acids that can help break down the copper oxide. This method is a bit unconventional but can be effective for some types of oxidation.
- Mix Ketchup and Salt: Combine a small amount of ketchup with salt to create a paste.
- Apply the Paste: Spread the ketchup paste over the oxidized areas and let it sit for a few hours.
- Rinse and Polish: Rinse the copper with water and then polish it to bring out the shine.


6. Lime and Water
Lime, when combined with water, can create a solution that can help dissolve copper oxide.
- Prepare Lime Water: Boil water and add a few slices of lime to it.
- Soak the Copper: Place the oxidized copper in the lime water solution and let it soak for a few hours.
- Rinse and Dry: After soaking, rinse the copper with water and dry it thoroughly.

7.
Toothpaste
Some toothpastes contain mild abrasives that can help clean oxidized copper.
- Apply Toothpaste: Apply a small amount of non-gel toothpaste to a soft cloth.
- Rub Gently: Gently rub the toothpaste onto the oxidized areas of the copper.
- Rinse and Dry: Rinse the copper with water and dry it to prevent further oxidation.

Important Considerations
- Always test a small, inconspicuous area first to ensure the cleaning method does not damage the copper.
- Avoid using abrasive materials that can scratch the surface of the copper.
- After cleaning, it's essential to dry the copper thoroughly to prevent water spots and further oxidation.
- Store copper items in a dry place, and consider using anti-tarnish bags or wrapping to protect them from the air.

Remember, the goal is to remove the oxidation without damaging the underlying copper. Each method has its pros and cons, and the best one for you will depend on the extent of the oxidation and your personal preferences for cleaning materials.

read more >>

Method 5 Salt, Vinegar And Flour MethodPlace 1 tablespoon of salt in 1 cup of white vinegar.Make a paste by adding flour gradually. Mix together well.Apply the paste to the copper and smear over tarnished areas.Leave for 15 minutes to one hour.Rinse with warm water and polish.read more >>