As a plumbing expert with years of experience in the field, I've handled a wide range of issues related to household plumbing, including toilet water level adjustments. Adjusting the water level in a toilet is a crucial maintenance task that ensures the efficient and hygienic operation of the toilet. Here's a step-by-step guide on how to do it:

### Step 1: Turn Off the Water Supply
Before you start, it's essential to turn off the water supply to the toilet. This is typically done by turning the valve located on the wall behind the toilet, or if there's no valve, you might need to shut off the main water supply to the house.

### Step 2: Flush the Toilet
Once the water supply is off, flush the toilet to drain the tank. This will allow you to see the water level inside the tank and the fill valve's position.

### Step 3: Locate the Fill Valve
The fill valve is the component that controls the water level in the toilet tank. It's usually found at the bottom of the tank, connected to the flush valve mechanism.

### Step 4: Adjust the Fill Valve
The adjustment screw, which you mentioned, is typically found on the top of the fill valve. To raise the water level, turn the adjustment screw clockwise. To lower it, turn it counter-clockwise. It's important to make small adjustments and flush the toilet after each to observe the changes in the water level.

### Step 5: Check the Water Level
After adjusting the fill valve, check the water level in the tank. The water should reach just below the overflow tube. If it's too high, it can cause the toilet to run continuously. If it's too low, the toilet may not flush properly.

### Step 6: Adjust the Float
Some fill valves have a float that controls the water level. If your toilet has one, you might need to adjust the float arm's position to ensure the water level is correct.

### Step 7: Test the Toilet
Once you've made the adjustments, turn the water supply back on and allow the tank to fill. Flush the toilet several times to ensure the water level is stable and the toilet is functioning correctly.

### Step 8: Troubleshoot if Necessary
If the toilet is still not filling correctly, there may be other issues at play, such as a faulty fill valve or a leak in the system. In such cases, it might be necessary to replace the fill valve or call a professional plumber.

Remember, adjusting the water level in a toilet is a simple task, but it requires precision and patience. Always make small adjustments and test the toilet after each change to avoid overfilling or underfilling the tank.

read more >>

Fill Valve Adjustment: To adjust the fill valve, you simply turn an adjustment screw located on the top of the valve. To raise the water level, turn the adjustment screw in a clockwise direction. To lower the water level, turn the screw in a counter-clockwise direction.Oct 23, 2017read more >>