As a cleaning and maintenance expert with years of experience in dealing with various household issues, I am well-versed in the art of removing unwanted substances from various surfaces, including shoes. Mouse trap glue, or any other adhesive, can be quite stubborn but with the right approach and patience, it can be removed effectively.

Firstly, it's important to understand that mouse glue traps are designed to be very sticky to catch mice, which means they can be quite a challenge to remove from your shoe. The process requires a careful and methodical approach to ensure that you do not damage the shoe while cleaning it.

**Step 1: Peel the glue trap off your shoe.** The initial step is to try and peel off the glue trap from your shoe. This can be done by gently lifting the edges of the glue with your fingers or a blunt object like a plastic scraper. Be careful not to apply too much force as it might cause the glue to spread or stick more firmly to the shoe.

**Step 2: Use a knife to scrape the majority off your shoe.** Once you have removed the bulk of the glue trap, there will likely be some residue left behind. Using a knife or a similar tool, gently scrape off the remaining glue. Remember to be gentle to avoid scratching or damaging the shoe material.

Step 3: Work Goo Gone into the glue. Goo Gone is a popular adhesive remover that can be used to dissolve the glue residue. Apply a small amount of Goo Gone to a cloth or directly onto the glue residue and let it sit for a few minutes to break down the adhesive.

**Step 4: Use your knife to scrape the surface of the shoe clean.** After the Goo Gone has had time to work, use your knife to scrape off the softened glue. Be sure to do this carefully to avoid damaging the shoe surface.

Step 5: Repeat Step 3 and Step 4. Depending on the amount of glue residue, you may need to repeat the application of Goo Gone and the scraping process several times until all the glue is removed.

Step 6: Put on your clean shoe. Once you have successfully removed all the glue, clean the area with a damp cloth to remove any remaining Goo Gone or adhesive residue. Allow the shoe to dry completely before wearing it again.

Remember, the key to this process is patience and care. Rushing through the steps or using excessive force can lead to damage to your shoe. It's always better to take your time and ensure that the glue is fully removed without causing any harm to your footwear.

read more >>

Step 1: Peel the glue trap off your shoe. There's nothing pretty about this. ... Step 2: Use a knife to scrape the majority off your shoe. ... Step 3: Work Goo Gone into the glue. ... Step 4: Use your knife to scrape the surface of the shoe clean. ... Step 5: Repeat Step 3 and Step 4. ... Step 6: Put on your clean shoe.read more >>