As a plumbing expert with over a decade of experience in the field, I can confidently address your concern about water hammer and its potential to cause pipe bursts.

Water hammer is a phenomenon that occurs when a fluid in motion, such as water in pipes, is forced to stop or change direction suddenly. This rapid change in flow can create a pressure surge within the pipes, which can be damaging if the pressure exceeds the pipe's capacity. However, not all water hammer events lead to pipe bursts. The likelihood of a pipe bursting from water hammer depends on several factors:


1. Pressure Surge: The intensity of the water hammer effect is directly related to the pressure surge it creates. A higher surge increases the risk of pipe failure.


2. Pipe Material: Different materials have different strengths. For example, copper pipes are more resistant to water hammer effects than plastic pipes.


3. Pipe Age and Condition: Older pipes or those in poor condition are more susceptible to damage from water hammer.


4. Pipe Size and Design: Larger pipes can handle higher pressure surges better than smaller pipes. Also, certain pipe designs are more resistant to water hammer.


5. Presence of Pressure-Relief Devices: Devices such as air chambers or surge arrestors can help mitigate the effects of water hammer by absorbing the pressure surge.

While water hammer can potentially cause pipes to burst, it is not a common occurrence. Properly designed and maintained plumbing systems are equipped to handle the pressures involved. However, if you suspect that water hammer is causing issues in your plumbing system, it's important to consult with a professional plumber to assess and address the problem.

read more >>

Water hammer occurs when the flowrate of fluid in the pipe changes rapidly. It is also known as ��surge flow��. It can cause very high pressures in pipes, very high forces on pipe supports, and even sudden reversals of flow. It can cause burst pipes, damaged supports and pipe racks, and leakage at joints.read more >>